Setting The Blank Time Of The Lap Button Lap Blank T - KTM 2008 1190 RC8 USA Owner's Manual

CONTROLS

Setting the blank time of the LAP button LAP BLANK T

5.45
–
Press the MODE button briefly.
The engine speed after RPM2 flashes.
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. If RPM1 = RPM2, the shift warning light lights up constantly when you
reach the engine speed set.
–
Set the engine speed with the button
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTING menu.
Info
At delivery, RPM1 is set to 10000 and RPM2 to 10500.
–
Press the button briefly and repeatedly until the
display.
–
Press the MODE button briefly.
–
Press the button briefly and repeatedly until the
info display.
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is stationary.
or the button .
symbol is on BACK... in the info
symbol is on EXIT SETUP in the
72