29, Mounting Of Air Separator; 30, Adjusting The Door Opening Angle; 31, Changing The Door Spring - Thermador T24IF70NSP/47 Installation Instructions Manual

29. Mounting of air separator
Screw the air separator to the furniture door in order to
separate the supply and waste air.
For appliances with ice-water dispenser:
30. Adjusting the door opening angle
Depending on the installation situation, it may be necessary
to adjust the door opening angle. A door opening angle of
115 ° has been set at the factory.
To adjust the door opening angle to 90°:
• Open door to 90 °.
Insert the banking pin through the borehdes which are
now vertically aligned and drive in with a hammer.
31. Changing the door spring
Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension
Installation of the appliance is now complete.
4O