Table of Contents
Advertisement
q
Insert the cover strip into the space between the
appliance and the wooden panel (individual
appliances only).
24. Mounting of air separator
Screw the air separator to the furniture door in order to
separate the supply and waste air.
q
Shorten the air separator to the required length.
q
Attach the air separator with the 2 clamps.
Align the air separator with the center line of the
door as illustrated in the diagram.
For appliances with ice water dispenser:
i
The air separator must be cut out in the area of the
hose.
25. Adjusting the door opening
angle
Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
q
Open door to 90°.
q
Insert the banking pin through the boreholes which
are now vertically aligned and drive in with
a hammer.
26. Changing the door spring
To adjust the door spring:
q
Rotate the adjusting screw with a cross head
screwdriver.
I = maximum spring tension
0 = no spring tension
33
Advertisement
Chapters
Table of Contents
