Design Specifications - Thermador KBUIT4255E Installation Instructions Manual

DESIGN SPECIFICATIONS
Stainless Steel Series
Features stainless steel exterior styling.
KBUIT4255E KBUIT4265E
KBUIT4855E KBUIT4865E
._lllnllUlllllllllllllliilllMlllllllllllllllllllnl_ _
Custom Panel Series
Features factory-installed, traditional style trim to provide a
"framed" look. This series requires the installation of custom
panels that are not included.
KBUIT4275E KBUIT4875E
TRIMKITSXS - Trimless Trim Kit
On the Custom Panel Series, you can create a "frameless" look
using full-overlay custom panels. You will need to order a
Trimless Trim Kit for Side by Sides TRIMKITSXS. This accessory
kit contains parts to replace the factory trim.
Full-overlay custom panels and handles are required but not
included in the accessory kit. Create the panels according to the
specifications in the "Full-Overlay Custom Panels" section. You
can order a set of Thermador's Handles or select handles from
another source. For door clearances, see "Handle and Door
Clearances for Custom Panel Series."
Handle Kits
For use with Stainless Steel models. You can purchase a handle
type other than that provided with your model. See your dealer for
Details.
CURVHNDL10 - Curved Handle Kit
PROHNDL160 - Pro Handle Kit
PROHNDL165 - Designer Pro Handle Kit
MASTHNDL55 - Masterpiece Handle Kit
EXTHANDSXS - Extended Handle Kit for Side by Sides
This kit may be required if you install a custom raised panel. See
"Handle and Door Clearances for Custom Panel Series."