JVC UX-DM8 Instructions Manual page 7

~
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
AM loop antenna
(supplied)
FM antenna (supplied)
Extend it so that you can obtain the best
reception.
For better FM reception
• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75
connector (IEC or DIN45325).
FM outdoor antenna
(not supplied)
Ω
wire with coaxial type
Ÿ
Speakers
• When connecting the speaker cords, match the polarity of
the speaker terminals: transparent to (+) and transparent
with black stripe to (–).
Insert
Press and hold
Transparent
Transparent
with black
stripe
Press and hold
Right speaker
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom
of the speakers.
!
To connect the power cord
To a wall outlet
Power cord (supplied)
• Disconnect the power cord before cleaning or moving the
System.
Release
Transparent
Transparent
with black
stripe
Insert
Left speaker
Release
On the rear panel
4