JVC UX-DM8 Instructions Manual page 38

4 Set the start time and end time of the selected timer.
• Adjust the start hour, the start minute, the end hour,
then the end minute.
5 Select "ONCE" or "WEEKLY."
Recording Timer works once.
ONCE
Recording Timer works weekly or every
WEEKLY
day.
6
Display the week setting screen.
7 Set the desired day of the week.
• When "WEEKLY" is selected:
Recording Timer works on the
Sun, Mon,
selected day every week.
Tue, Wed,
Thu, Fri, Sat
Recording Timer works from Monday
Mon-Fri
to Friday.
Recording Timer works from Monday
Mon-Sat
to Saturday.
Recording Timer works every day.
Everyday
• When "ONCE" is selected:
The recording timer works on the
Sun, Mon,
selected day.
Tue, Wed,
Thu, Fri, Sat
8
Select "REC TIMER."
35
9 Select a source to record.
• When you want to record the radio broadcast (FM or
AM):
Select the preset number of the desired station.
• You can also use the number buttons to select the
preset number.
10
If the setting is done during system is on, turn off the
System.
To set Recording Mode
Set the Recording Mode before or after setting Recording
Timer.
• To set Recording Mode, see step 2 of "Recording from a
Disc" on page 21.
About group of the built-in memory
When Recording Timer works, the group named "TIMER"
is made automatically and the recordings are stored as the
tracks into that group.
• You cannot select other groups for storage.
To cancel Recording Timer
In step 2 on page 34, select the timer number you want to
cancel, then press CANCEL.
• Even when you cancel Recording Timer, the setting
remains stored.
To activate Recording Timer again
In step 2 on page 34, select the timer number you want to
activate, then press ENTER. The settings appear on the
display. After you confirm it, turn off the unit.