JVC UX-DM8 Instructions Manual page 25

3 Select the Recording Speed.
REC SPEED
NORMAL
REC SPEED
Record at same speed as usual playback.
REC SPEED
NORMAL
Record at a speed of 8 times* normal
REC SPEED
speed.
HIGH
* Sometimes record at a speed of 4 to 5 times normal
speed according to the condition of the disc.
• For MP3/WMA/WAV track:
– If you select "REC SPEED HIGH," this System
records at same speed as usual playback.
– The tracks are recorded in analog recording.
• When "REC SPEED HIGH" is selected, you cannot
hear playback sounds while recording.
• For some discs, vibration noise is heard while recording
with "REC SPEED HIGH." It is not a malfunction.
• When you record tracks using "REC SPEED HIGH,"
the tracks may not be recorded correctly and the noise
may be recorded. In this case, record the tracks using
"REC SPEED NORMAL."
4 Select the recording device.
To record onto built-in
memory:
(on the main unit)
• If you try to record from a duplicated CD-R or CD-RW
onto the built-in memory or USB device, "SCMS
CANNOT COPY" appears on the display and you
cannot continue the recording procedure any further. In
this case, select "REC SPEED NORMAL" in the step 3
and press and hold MEMORY REC V or USB REC V
for more than 4 seconds to show "ANALOG REC?" on
the display.
Pressing the button again and proceed to step 5 will start
analog recording of the tracks.
HIGH
To record onto USB
device:
(on the main unit)
5 Select the group to record tracks into.
• When you make a new group for the tracks:
1 Select "FORM GR ?" mode.
2 Make a new group.
Ex. When 5th group was made
• The first new group you make is displayed as the
2nd group because the root of the memory of USB
device is recognized as the 1st group.
• You can enter the title of new group in this step.
When you want to enter the title of new group, see
"Entering Titles" on page 29.
3 Start recording.
• When you select an existing group to record tracks
into:
1 Select a desired group.
• How to select an existing group, see "To select a
group" on page 9.
2 Start recording.
To record onto built-in
memory:
(on the main unit)
• When you want to record into the root group (G1
MUSIC) of the recording device:
To record onto built-in
memory:
(on the main unit)
Both recording and playback start at the same time. When
playback ends, recording also stops.
• If you programmed the playing order for CD (see "To
program the playing order of tracks on a discs" on
page 15), the tracks are recorded in the programmed order.
To record onto USB
device:
(on the main unit)
To record onto USB
device:
(on the main unit)
22