Recording Operations; Before You Start Recording - JVC UX-DM8 Instructions Manual

Remote control
7
GROUP SKIP
CD 6
REPEAT
HQ/SP/EP
REC SPEED
Main unit

Recording operations

SET
ENTER
USB 6
MEMORY 6
MARKING
MODE
CD #/8
MEMORY #/8
USB #/8
7
USB REC ¶
MEMORY REC ¶

Before You Start Recording

• It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
• The recording level is not affected by the volume.
• Active Hyper Bass Pro, tone adjustment and/or sound
mode effect (see page 12) does not affect recordings.
• You can record up to 999 tracks to the built-in memory or
USB device. If you try to record a track after recording 999
tracks, "TRACK FULL" appears on the display and the
track will not be recorded.
• This tracks which are recorded to built-in memory or USB
device will be converted into MP3 format.
• When you record an MP3/WMA/WAV track from a disc
into the built-in memory...
– If the filename of the track is displayable on the System,
the title of the recorded track is copied from the original
filename and added the extension ".MP3."
– If the filename of the track is undisplayable on the
System or the filename does not exist, "track.MP3" is
given for the title to the recorded track.
• When you record tracks from a USB device to the built-in
memory, the tracks are moved to the built-in memory and
the tracks on the USB device are deleted.
• You cannot record WMA-DRM (Digital Rights
Management) tracks from a USB device to the built-in
memory.
• When you record tracks from the built-in memory to a USB
device, the tracks are moved to the USB device and the
tracks on the built-in memory are deleted.
• When you record the tracks from an iPod or portable audio
device, the System starts synchronizing recording with the
incoming sound signals. When no sound signal comes
from an iPod or portable audio device for 30 seconds, the
System stops recording automatically and add the section
of no sound about 2 seconds to the end of the recorded
track.
• You cannot start recording or moving tracks into a USB
device while "USB READING" is shown on the display.
• Some USB devices have limit of recordable track number
in the root group. Select another group or make a new
group to record/move tracks when the number of target
tracks to record/move is over the limit.
• Do not disconnect a USB device while playing/recording/
editing. It may cause malfunction.
20