Haier XQS60-78H User Manual page 13

CHILD LOCK FUNCTION
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF
button. The digitron displays CL . You can continue setting desired washing procedures.
After setting, push down the START/PAUSE button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the WATER LEVEL and SPIN button at the same
time for more than 1 second. After a beep sound, the child lock function is released.
RESERVE/REMAIN time indicator digitron
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds 99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents 103 minutes.
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 16)
Time remained
(minutes)
Reserve
(hours later)
WATER LEVEL
RESERVE/CALEFACTION
Press " RESERVATION/CALEFACTION
reservation or heating Function.
During machine running, the digitron indicates the cycle
remaining time in minutes). Press "
/CALEFACTION "button, the digitron will Indicate the
remaining reserved time to cycle end (in hours).The digitron
will indicate the running state of the machine.
Heating function can be selected if keep pressing
"RESERVATION/CALEFACTION"Button for more than 2 s.
If the decimal point of digitron is lighted, it means heating
function is selected. The initial temperature is about 30 ,
and you can select your desired value in a switching
sequence 30 40 off 20 . If keep pressing the
"RESERVATION/CALEFACTION" button for more than 2 s
again, the temperature indicator turns off, and the
Reservation can be selected , you can select reserved time.
After the machine starts running, if selection or cancellation
of heating function is desired, you should switch off the power
and reselect.
Page16
PROGRAM
"button to set
RESERVATION
The washing machine can detect the laundries automatically.
After detection, it will set the water level to suitable value among 4, 6,
8, and 10 automatically.
You can also set water level by yourself. After the machine is started,
it will not set water level automatically. You shall push the
start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You must
set suitable water level by yourself.
If POSTHASTE programs selected, it will display water level 3 .
When water level 2 is reached in water filling, it will perform
washing while filling water. When water level 3 is reached, it will
change to normal washing.
During operation of wash and rinse program, you can push down
the water level button to add water. When you release the button, or
it reaches the overflow water level, the machine will stop adding
water.
POWER ON/OFF button
Push the ON/OFF button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the ON/OFF button to switch
on the power.
If the START/PAUSE button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
POWER
ON/OFF
START
PAUSE
After the power is switched on, push it to Start the machine
During working, push it to pause working.
During pause, push it to resume working.
Following automatic programs are available for selection
Applicable situation
PROGRAM
Common washing
STANDARD
Quick and high-efficiency wash for
QUICK
common
Super quick wash of the laundry under 1 kg
POSTHASTE
with light soil
Washing the relatively big and thick laundries
JEAN
Washing the chemical fiber laundries
FIBER
Washing the cotton textiles
COTTON
Washing the woolen textiles
WOOLLEN
Washing the textile
SILK