XQB50-20 Fuzzy Logic Automatic Washing Machine Part specialized code 0030504485 Please check if the power receptacle has good earthing condition before using to guarantee your safety. The product is used only in the Chinese continent..If other countries or areas need it, please contact us.
Names of the parts Honorable users, Thanks for your choosing Haier products. To facilitate your operation, please read the manual carefully and operate this machine according to it. Top lid component Detergent box Control panal Location for liquid bleacher Location for lint filter...
Safety precautions Please plug the plug on special 220V~240 AC receptacle.Be sure to use three phase power receptacle. Ensurethe earthing prong of the power receptacle is earth-ed reliably. Use a leakage protector if possible. Earth Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items.
Page 4
Safety precautions Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine The handicapped or children without care shall not use the machine.
Special function introduction Eliminating foam rinse Press the RINSE button, when the tube is on, it indicates that you have chosen the ELIMINATING FOAM RINSE PROGRAM, and perform eliminating foam rinse firstly. Then, it will fill water continuously after the water level is high, and the foam in the tub will overflow from the overflow inlet, and avoiding polluting the clothes again.
How to change the direction of the drain hose 1 Loosen the fastening screws of the back cover,unpack the back cover gently, avoiding to break the clip claw. Figure 1 Back cover 2 Take the drain hose from the cabinet, make the mouth of it flat a little, dismantle the pothook, loosen the fastening screws, dismantle the drain hose support ,and pull the drain hose into the cabinet from the left of the base.
Install the water inlet hose Confirm the water faucet Water faucet, suitable Outlet end surface It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer.
1 Preparation before washing Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. special requirement Take out the coins, for the laundries. sand, hairpins etc. a. Check if the laundries are applicable for washing with the machine. b.
Using process Using process 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition (as per the laundries stipulated in the A2 Attachment of GB4288-1992 standard) that can be washed or spun in one time.
3 Usage of the detergent Softner dispenser Location for concentrated powder Detergent box Control panal Location for liquid bleacher How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub.
4 Use the operation buttons Description of the function of the buttons Mode and meaning of the indicator light Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode SOAK button WASH button Press the SOAK button to set Press the WASH button to set the process of SOAK.
Page 13
After the power is on,another press will switch off the power. After the power is on, if not press the START/PAUSE button, the washing machine will be shut-off 5 minutes later No.16 automatically. XQB50-20 POWER START PAUSE The following automatical program are available.
Page 15
After switching on the power, the machine will set to wash-rinse-spin program automatically. That is the most common program. To select other program, Push SOAK, WASH, RINSE and SPINbutton to select one or more programs among soak/wash/rinse/spin. After switching on the power button, if one of the WASH, RINSE, SPIN button is pushed firstly, then the digital lamps will go out automatically, and the process procedure is stopped .
Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level. Spin time: the time from intermittent running to finishing When selecting SOAK program, first soak for 10-40 minutes, then do wash, rinse, spin.
7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise, it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat.
Trouble-shooting Answer to question (If there's a breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
Packing list Name User's manual Warranty card Lint filter Components of the water inlet hose Bottom plate Tapping screws Fuzzy logic automatic washing machine Quantity Storage position Inside the document bag Inside the document bag Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package carton...
Max water consumption Injection pressure Rated washing power Rated spinning power Weight Dimension XQB50-20 220V-240V/ 50Hz 5 .0kg (weight of standard dry cloth) 1/15L 2/18L 3/23L 4/26L 5/28L 6/31L 7/33L 8/35L 9/38L 10/42L About 126L(Highest water level; STANDARD program) 0.03Mpa~0.78Mpa...