Setting The Audio Terminal - JVC TH-L1 Instructions Manual

Setting preferences
: Other setting menu (OTHERS)
7 RESUME (See page 25.)
You can activate or deactivate Resume Playback function.
7 ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons.
(See page 23.)
See page 29 for button locations.

Setting the audio terminal

You can set the analog or digital audio input terminal to use
with the source of VIDEO 1-3.
NOTE
• Before you start the operation;
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2 again.
1
Select "VIDEO 1", "VIDEO 2" or
"VIDEO 3" as the source.
(See page 16.)
2
Press SETTING.
Example:
3
Press 5/Y to select the source
you want to set.
• V1 A/D: For the source of VIDEO 1
• V2 A/D: For the source of VIDEO 2
• V3 A/D: For the source of VIDEO 3
4
Press 2/3 to select the audio
input terminal you want to use for
the source selected in the above
step.
Example:
• ANALOG: Signal from AUDIO jacks comes out of
the speakers (see pages 10 to 12).
• DIGITAL: Signal from DIGITAL IN terminal comes
out of the speakers (see pages 10 to 12).
NOTE
• If you press DVD 3 or DVD
procedure, you cannot select ANALOG/DIGITAL by
pressing 2/3. In this case, press the button for the current
source (VIDEO1, VIDEO2 or VIDEO3) then press 2/3 to
select ANALOG/DIGITAL.
8
in the middle of the
31