Connecting A Tv - JVC TH-L1 Instructions Manual

Connections

Connecting a TV

• You can get better picture quality in the order — HDMI > Component video > S-video > Composite video.
• Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a built-in VCR.
• You need to set "MONITOR TYPE" in the PICTURE menu correctly according to the aspect ratio of your TV. (See page
29.)
• If your TV supports progressive video input, you can enjoy a high quality picture from the source of "USB MEMORY" by
setting the progressive scanning mode to active and connect your TV with the component video cord. (See page 18.)
• You can use below terminals for each sources to see the picture on the TV.
Terminal
HDMI
COMPONENT VIDEO
S-VIDEO
VIDEO
Center unit
NOTE
• HDMI MONITOR OUT terminal passes through the signal from the HDMI input terminal (VIDEO 1 and VIDEO 2) selected as
the source.
• COMPONENT MONITOR OUT terminal passes through the signal from the COMPONENT input terminal (VIDEO 1 and
VIDEO 2) selected as the source.
• S-VIDEO MONITOR OUT terminal passes through the signal from the S-VIDEO input terminal (VIDEO 1, VIDEO 2 and
VIDEO 3) selected as the source.
• VIDEO MONITOR OUT terminal passes through the signal from the VIDEO input terminal (VIDEO 1, VIDEO 2 and VIDEO
3) selected as the source.
• Use an HDMI cable shorter than 5 m.
• When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be
transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process.
• If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to
BNC plugs.
Do not connect the power cord until all other connections have been made.
Source VIDEO 1
VIDEO 3
VIDEO 2
√
—
√
—
√ √
√
√
To HDMI input
HDMI cord (not supplied)
5
Align the
marks.
S-video cord
(not supplied)
or
Composite video cord
(supplied)
Component video cord
USB
iPod
MEMORY
— —
√
—
√ √
√ √
To S-video To composite
input video input
(not supplied)
TV
To component
video input
9