Clock Setting - JVC DX-E78BK Service Manual

AX-E78BK
AX-E79STN
Using the
Timers
)
TERY TMER? DALY =
19
1-20 (No.20423)
sonenoom
PRESET STATIONS.
The timers let you control recording and playing functions automatically.
Four types of timers are available:
Q 'Timer 1, Timer 2 — unattended recording of radio broadcasts.
Q Daily — recording of a radio broadcast that occurs at the same time every day.
Q Wake up Timer — Wake up to music from any source.
Q Sleep Timer — Fall asleep and have your system turn off automatically after a certain length of time.
Clock Setting
The timers depend on the clock: If the clock is right, the timers will work like you expect, but if the time is
incorrect on the clock then the timers will also be incorrect.
Special Notice: The clock must be set, or the timers cannot be set!
So, let's set the clock first.
1. Press the CLOCK ADJUST button.
. Set the hour by pressing <TUNING or TUNING> button. Pressing the TUNING> button increase the
hour, and pressing the <TUNING button decreases it.
3. Press the MEMORY button on the Tuner.
4. Set the minutes by pressing <TUNING or TUNING> button. Pressing the TUNING> button increase the
minute, and pressing the <TUNING button decreases it.
5. Press the MEMORY button again and the clock is set and starts from zero second.
Setting Timer1, Timer 2, and the Daily Timers
With these timers you can make a tape of a radio broadcast (or other sound sources) automatically whether
or not you are there to start the system. You can also play the sound source at the specified time without
recording them. For the timer to work correctly, you need to make sure of two things in addition to setting the
time for the sound source and tape recorder to come on:
( The tape you want to record onto must be in deck B when you want to record.
Follow this procedure to set Timer 1, Timer 2, and the Daily Timer:
1. Press the TIMER 1, TIMER 2, or DAILY button to tell the system which timer you are going to set. The
corresponding indication (TIMER 1, TIMER 2, or DAILY) flashes in the display. As long as itis flashing,
you can continue with the setting process. If you wait too long, and it stops before you are done, just press
the button twice and start over.
2. Set the time you want the sound source to come on and the tape in deck B to start recording.
Q Use the <FUNING or TUNING> button just like setting the clock.
3. Set the time you want the sound source to shut off and the tape in deck B to stop recording.
OQ Use the <TUNING or TUNING> button just like setting the clock.
Settings:
Display What it means
wert ee cece
Plays from whichever source was used just before turning off the system.
TUNER Plays an FM or AM (MW/LW) broadcast
TUNER TIMER REC Records an FM or AM (MW/LW) broadcast
cD Plays aCD
TAPE Plays tape
-- -- TIMER REC
Records from whichever source was used just before turning off the system.