Giving (Editing) Titles To Tracks Or Groups - JVC CA-NXG7 Instructions Manual

Giving (Editing) Titles to Tracks
or Groups
You can give titles to the tracks (up to 24 characters)
and groups (up to 28 characters) in the USB device.
• While playing, you cannot edit track/group titles.
1
Start and stop playback of the USB device.
2
Select a track/group you want to edit.
To select a track:
To select a group:
(while holding...)
3
Select the track/group title editing mode.
TR DELETE?
GR DELETE?
TR TITLE? For editing a track title
GR TITLE? For editing a group title
4
Enter a title.
GROUPX
Ex.: When "GR TITLE?" is selected in step 3
text_EN_NXG7G3.indb 30 text_EN_NXG7G3.indb 30
TR TITLE?
GR TITLE?
(Canceled)
Character type
A
• For entering a title, see "How to enter titles" on
page 31.
• You can also enter a title using the TV on-screen.
GROUP TITLE EDIT
ABCDE
abcde
01234 GROUP01
[0 – 9] KEY ENTER LETTERS
CHANGE CHARACTER TABLE
MOVE CURSOR
[CANCEL] DELETE A LETTER
[ENTER] REGISTER NEW NAME
5
Finish the procedure.
EDITING
To give title to other groups/tracks, repeat steps
2 to 6.
To give title to a new group before
recording
When you record tracks into "NEW GROUP?" in step
4 of "Recording from a Disc" on page 29, you can give a
group title before starting to record.
1
After selecting "NEW GROUP?" in step 4
of "Recording from a Disc" on page 29...
2
Edit the group title by following step 4 in
the previous column.
3
Finish the procedure.
Recording starts.
See page 54 for more information about the warning
messages shown on the display.
30
08.6.25 2:22:24 PM 08.6.25 2:22:24 PM