Assigning Titles To Albums And Tracks - JVC NX-HD10 Instructions Manual

Assigning Titles to Albums and Tracks

You can assign a title to each album and track. Once a title
is assigned, it is displayed during playback.
• The maximum number of the characters used for each
title is 64.
• When you want to change the libraries' names, see
"Changing the Library Names—LIB. NAME" on page
53.
In the following examples, the processes are explained
assuming that the unit is turned on.
• To exit from the title entry screen any time during the
process, press TITLE/EDIT.
• To return to the previous screen any time during the
process, press CANCEL (except while the title entry
screen is shown).
• You cannot enter Title/Edit modes during Random
play and Search Modes.
• Library play, Album play, and Repeat play are
canceled when you press TITLE/EDIT (Continuous
play will resume).
• You can also assign a name to an album and track
currently recorded while recording.
To assign a title to an album
On the remote control ONLY:
1
Press TITLE/EDIT once.
• The source changes to "HDD" automatically if
another source has been selected.
• Each time you press the button, Title/Edit modes
change as follows:
TITLE? LIB. EDIT?
(Library edit)
Canceled
2
Press SET.
• Each time you press SELECT ¢ or SELECT 4 ,
the album title entry mode or the track title entry
mode ("TRACK?" or "ALBUM?") is alternately
selected.
ALBUM EDIT?
TRACK EDIT?
– 49 –
3
Press SET again.
The unit enters the album title entry mode.
Currently selected album number appears first.
4
Press ALBUM + or ALBUM – to select the album you
want to assign a title to, then press SET.
The album title entry screen appears in the main
display.
• If a title has been assigned, it will appear.
Character entry position
Ex. When selecting Album 19
5
Assign the title.
1) Press DISP/CHARA to select the character set you
want.
• Each time you press the button, the character sets
change as follows:
Capital letters
& Symbols
2) Press the character entry button for a character
you want to enter.
Examples:
• To enter an "A" or "a," press ABC once.
To enter a "B" or "b," press ABC twice.
To enter a "C" or "c," press ABC three times.
• To enter a symbol, press MARK repeatedly until
the symbol you want appears (see page 36 for
available symbols).
• To enter a numeral, press 0 – 9.
• To enter a space while entering a title, press
twice.
• To insert a character, press
the character entry position, then press a character
entry button.
• To erase a character, press
the character entry position, then press CANCEL.
3) Repeat steps 5 – 1) and 5 – 2) to enter other
characters.
• If the character you want to enter next is assigned
to the same button you have just pressed in step
5 – 2), press
entry position to the right.
Character set
Small letters
& Symbols
Numerals
or to move
or to move
once to move the character