JVC CA-NXG7 Instructions Manual page 43

4
Select the repeat mode you want.
A-B Repeats a desired portion (see the
next column).
TITLE* Repeats the current title.
ALL Repeats the disc (not applicable
for DVD) or programmed track.
CHAPTER** Repeats the current chapter.
TRACK** Repeats the current track.
Cancels Repeat Play.
OFF
* While playing a DVD-VR, "PG" appears, and
while playing a Play List, "PL" appears.
** During Program Play and Random Play, "STEP"
appears.
5
Finish the setting.
A-B Repeat
You can repeat playback of a desired portion by
specifying the beginning (point A) and the ending
(point B).
• A–B Repeat cannot be used for MP3/WMA/WAV/
JPEG/MPEG-1/MPEG-2/ASF/DivX files and some
DVDs.
1
While playing, display the entire on-screen
bar.
2
Select .
OFF
3
Display the pop-up window.
Dolby D
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF CHAP.
OFF
4
Select "A-B."
text_EN_NXG7G3.indb 40 text_EN_NXG7G3.indb 40
TOTAL 1:01:58 1:25:58
TITLE TITLE 2 14 CHAP CHAP 3 23 TOTAL
1/3 1/3 1/3
1/3 1/3 1/1
Dolby D
T
DVD-VIDEO
3/2.1ch
TIME OFF CHAP.
TIME OFF
A–B
5
Select the start point (A).
Dolby D
DVD-VIDEO
3/2.1ch
TIME TIME A-
6
Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
• You can search for the end
point using the ¡ button.
To cancel A-B Repeat, repeat steps 1 to 3, and select
"OFF" in step 4.
• A-B Repeat will also be canceled when you stop play
or skip the chapter or track.
Time Search
You can move to a particular point by specifying the
elapsed playing time from the beginning.
• This function is not available during Program Play
and Random Play.
1
While playing (without PBC for SVCD/
VCD), display the entire on-screen bar.
• Time Search can also be used before starting
playback (not applicable for DVD Video/DVD-
VR).
2
Select .
3
Display the pop-up window.
Dolby D
14
TITLE TITLE 2
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF CHAP.
TIME _ : _ _ : _ _
4
Enter the time.
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0,
then 0.
To move to a point of 54
(minutes): 00 (seconds),
press 0, 5, 4, 0, then 0.
• It is always required to enter the hour digit (even
"0" hours), but it is not required to enter the final
zeros (the last two digits in the examples above).
• To correct a mis-entry, press 2 to erase the last
entry.
Continued on the next page.
TITLE TITLE 2 14 CH C
1/3
CHAP. 1/3
23 TOTAL TIME 0:00:58 1:25:58
CHAP CHAP 3
1/3 1/3 1/3
1/3 1/3 1/1
40
08.6.25 2:22:35 PM 08.6.25 2:22:35 PM