Honda 2009 CBR1000RR Owner's Manual page 48

To Activate/Deactivate the Automatic
Reset Mode
You can activate or deactivate the
automatic reset by refueling mode.
Initial setting is deactivated.
1. Press and hold control button B ( ),
and turn on the ignition switch. Keep
control button B pressed until the lower
segment ( ) of the multi-function 2
display starts to blink.
(1)
(1) control button B
2. Press control button A ( ) to activate or
deactivate the automatic reset mode.
1
(2)
(2) lower segment
3
Gauges, Indicators & Displays
(3)
(3) control button A
3. To end the selection, press control
button B. The display will return to the
ordinary conditions.
The display will stop blinking
automatically and return to the ordinary
conditions if the button is not pressed for
about 30 seconds.
As you turn off the ignition switch during
the presetting procedures, the preset data
just before turning off the ignition switch
will be registered.
Instruments & Controls
activated
deactivated
39