Honda 2009 CBR1000RR Owner's Manual page 217

If You Have a Flat Tire
2. Make sure that the lug ( ) on the rear
brake bracket is positioned in the slot
( ) on the swingarm ( 9
(8) lug
(9) slot
208
Taking Care of the Unexpected
8
10 ).
(8)
(9)
(10)
(10) swingarm
3. Insert the rear axle shaft from the left
side, through the left swingarm, wheel
hub and rear brake bracket.
4. Install the drive chain by pushing the
rear wheel forward.
5. Install the rear axle nut and tighten the
drive chain adjusting bolts.
Refer to drive chain adjustment
(page 163 ).
6. Tighten the rear axle nut to the
specified torque:
83 lbf·ft (113 N·m , 11.5 kgf·m)
Failure to provide adequate disc-to-rear
brake bracket clearance may damage
the brake discs and impair braking
efficiency.