Honda 2009 CBR1000RR Owner's Manual page 225

If a Fuse Blows
Circuit Fuse Access:
6. (CBR1000RR)
Release the tabs ( ), then remove the
fuse box cover ( ). 9
(CBR1000RR ABS)
Release the tabs by pushing the front
tab backward, then remove the fuse box
cover.
7. To check or replace a circuit fuse, pull
the old fuse out of its retaining clips.
Look for a burned wire inside the fuse.
If the fuse is blown (
a spare fuse ( 7 ) of the same rating.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
216
Taking Care of the Unexpected
8
10 ), replace it with
Replacing a f use with one that has a
higher rating greatly increases the chance
of damage to the electrical system.