Honda 2009 CBR1000RR Owner's Manual page 133

Engine Oil & Filter
12. Check the condition of the sealing
washer on the engine oil drain bolt.
Replace the washer every other time the
oil is changed.
Install the engine oil drain bolt and
tighten it to the specified torque:
22 lbf·ft (30 N·m , 3.0 kgf·m)
Add Engine Oil:
13. Fill the crankcase with the
recommended oil (page
approximately:
3.2 US qt (3.0 )
14. Install the oil filler cap.
124
Servicing Your Honda
116 ),
15. Start the engine and let it idle for 3 5
minutes.
16. Stop the engine and wait 2 3 minutes.
17. Hold the motorcycle upright and check
that the oil level is at the upper level
mark on the dipstick (page
18. Check that there are no oil leaks.
19. Install the right middle cowl with screw.
20. Install the lower cowl (page
If a torque wrench is not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
119 ).
111 ).