Honda 2009 CBR1000RR Owner's Manual page 24

Lamp Check
The warning indicator comes on when you
turn the ignition switch ON so you can
check that it is working. The indicator
remains on until after the engine is started.
The PGM-FI malfunction indicator lamp
(MIL), low fuel indicator, shift indicator,
high beam indicator, left turn signal
indicator, and right turn signal indicator
light for a few seconds and then go off
when you turn the ignition switch ON.
(CBR1000RR ABS only)
The Combined ABS indicator comes on
when you turn the ignition switch ON.
This indicator goes off after you ride the
motorcycle at a speed above 6 mph (10
km/h).
Gauges, Indicators & Displays
When applicable, the high beam and
neutral indicators come on when you turn
the ignition switch ON and remain on until
you select the low beam or shift out of
neutral.
These indicators are identified in the table
on pages 18
Check.
If one of these indicators does not come
on when it should, have your Honda dealer
check for problems.
Instruments & Controls
21 with the words: Lamp
15