Lincoln 2013 MKZ Owner's Manual page 334

Capacities and Specifications
Item
2.0L EcoBoost engine
all-wheel drive fuel
tank
3.7L V6 engine front-
wheel drive or all-
wheel drive fuel tank
1
Use only Motorcraft® DOT 4 LV High Performance Brake Fluid or equivalent
meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than
the recommended fluid may cause brake system damage.
2
Approximate dry fill capacity. Actual amount may vary during fluid changes.
3
Automatic transmissions that require Motorcraft® MERCON® LV transmission
fluid should only use Motorcraft® MERCON® LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission
damage.
Change the automatic transmission fluid and filter at the correct service interval.
See Scheduled Maintenance (page 440).
4
See your authorized dealer for fluid level checking or filling.
5
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil must
meet or exceed the requirements of Ford specification WSS-M2C946-A, SAE
5W-30 (2.0L engine) or WSS-M2C945-A, SAE 5W-20 (3.7L engine) and display
the API Starburst Certification Mark.
6
If the Ford specification is not shown on the oil container, the oil container must
display the API Starburst Certification Mark and the correct viscosity.
7
Add the coolant type originally equipped in your vehicle.
Capacity Ford Part Name or
Equivalent
17.5 gal
(66.2 L)
17.5 gal
(66.2 L)
331
Ford Part Number
/ Ford Specifica-
tion