Lincoln 2013 MKZ Owner's Manual page 277

A
B
C
D
E158839
1. Shut the engine off.
2. Clean the area around the clamp
that connects the air filter
assembly to the rubber hose (A).
E158840
3. Remove the bolt cover (if
equipped).
Maintenance
4. Remove two bolts that attach the
air filter assembly to the front of
the vehicle (B).
5. Loosen the clamp holding the air
filter assembly to the rubber hose
(A).
6. Remove the harness retaining clip
by pulling up (C). Do not
disconnect the sensor (D).
7. Without disconnecting the sensor
(D), pull the air filter assembly up
to disconnect the air filter
assembly from the seated
grommets located underneath the
air filter assembly.
E158841
8. Rotate the air filter assembly 90
degrees counterclockwise and
reinstall into the rubber hose.
9. Tighten the clamp (A).
10. The transmission fluid level
274
indicator can now be accessed.