Tire Pressure Monitoring System - Lincoln 2013 MKZ Owner's Manual

Installation of the sealant canister
to the kit
E144626
1. Align the sealant canister with the
kit housing.
E144628
2. Once aligned, seat the sealant
canister by lightly pushing down
until you hear an audible click.
E144628
Wheels and Tires
3. Wrap the clear tube around the
Note: If you experience any difficulties
with the removal or installation of the
sealant canister, consult your Ford
Motor Company authorized dealer for
assistance.
E144629
Be sure to check the sealant
compound's use by date regularly.
The use by date is on the lower right
hand corner of the label located on
the sealant canister (bottle). The
sealant canister should be replaced
after four years.
TIRE PRESSURE
MONITORING SYSTEM
manually checking tire pressure. The
tire pressure should be checked
periodically (at least monthly) using
a tire gauge, see Inflating your tires in
this chapter. Failure to properly
maintain your tire pressure could
increase the risk of tire failure, loss of
control, vehicle rollover and personal
injury.
298
compressor housing.
WARNING
The tire pressure monitoring
system is NOT a substitute for