How To Change The Direction Of The Drain Hoses; Install The Water Inlet Hose; Select The Water Level - Haier HWM80-0626S User Manual

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Dismantle the drain hose fixing clamp and take
the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the side
of the spin tub in the order of 1 ~ 3 , heading for the
side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling
entrance on the control panel
dismantle the water inlet pipe, just push the
control handle as indicated in the figure and
pull it out
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Back
Front
Soft item
Extend to the
spin tub side
To
Water inlet
hose
Water-filling
entrance
5
Figure 1
Figure 2
Fig ure 3
Water level
indicator
Max
Maximum
Med
Medium
Min
Minimum