Haier HWM80-0626S User Manual page 12

Midway spinning
1.Put the laundries into the spin tub evenly and smoothly.
2.Spin
(1) Put the gland in properly.
Please put in the gland properly even if the
laundries quantity is small.
Push Gland
Proper
(2) Close the inner and outer cover of the spin tub.
(3) Spin for 1-2 minutes.
3.Run the foam-removing spinning.
1 Set the inlet selector handle on spin side and
fill water for about 1 min.
In case water flows out from wash tub side
due to too much inflow, please turn down
the water tap a bit.
2 Close the spin tub outer cover and spin
for about 1 - 2 min.
The laundries
Proper
are slanting
Outer cover of
The spin tub
Inner cover of
The spin tub
10
Push
No gland
WASH
WATER INLET SELECTOR
SPIN