Related Manuals for Haier HWM80-0626S
Summary of Contents for Haier HWM80-0626S
- Page 1 Twin-tub Washing Machine User's manual This manual is for HWM80-0626S HWM80-0626SH Please read this manual carefully before using. Retain it for future reference. 0030807884...
-
Page 2: Table Of Contents
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting Packing list *Specification *Answer to question... -
Page 3: Names Of The Parts
Names of the parts Wash tub cover Drain selector Program selector Wash timer Control panel seat Water-filling entrance Control panel Plate support (left) Water filling control handle Bypass channel Water level adjust lever Overflow filter Lint filter Drain hose Cabinet handle Wash tub Cabinet Base frame... -
Page 4: Safety Precautions
Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector. Do not bend ,extend, twist, bind by force. Do not press or nip it with weight. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully. - Page 5 Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drain hose shall drain smoothly 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. -
Page 7: How To Change The Direction Of The Drain Hoses
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. -
Page 8: Preparation Before Washing
Preparation before washing Pay attention to followings before washing the laundries Check if Clear the the laundries pocket. Take has special out the coins, requirement sand, hairpins on washing etc. a. Check if the laundri e s are applicable for washing with machine. b. -
Page 9: The Musts In Washing
The musts in washing Usage of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laun- dries with color or pattern as they are prone to lose color. -
Page 10: Washing Sequence
(Soft current, (To set to below 2 minutes, Standard current) first set to 6 minutes then turn it back.). STANDARD SOFT (HWM80-0626S) WASH TIMER FUNCTION SELECTOR Wash 1.Water-filling selector 1 Set the water inlet selector at the "WASH" side. (Figure 1) 2 Set the water level adjusting lever to needed line. - Page 11 Wash Calefaction Function selector (Soft current, Standard current) STANDARD SOFT CALEFACTION Figure 6 (HWM80-0626SH) FUNCTION SELECTOR When filling water to MAX or MED and MIN water levels, turn the SELECTOR to the CALEFACTION after put in the laundries. It begins to heat after close the wash tub, when the temperature reaches , the Buzzer will give an musical alarm.
- Page 12 Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland The laundries Proper are slanting (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes.
- Page 13 Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing.
- Page 14 Spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3.Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there is abnormal sound, it is generally owing to slanting placement of the laundries.
-
Page 15: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. -
Page 16: Cleaning The Overflow Filter
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside overflow filter ( as indicated in Figure 9). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. -
Page 17: Trouble-Shooting *Answer To Question
Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, Please take it out quickly. 1.Dismantle First take two plugs out, then dismantle the two screws which fixed the Spin tub frame. - Page 18 Trouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
-
Page 19: Packing List
Packing list Name User's manual Warranty card Water inlet hose Gland Twin-tub washing machine Specification Water level / Water quantity (about)(L) Injection pressure(MPa) Rated washing / spinning capacity kg Quantity One piece One piece One piece One piece One set Maximum/71 Medium/60 0.02...