Haier HWM80-27S User Manual
Haier HWM80-27S User Manual

Haier HWM80-27S User Manual

Haier twin-tub washing machine user's manual
Hide thumbs Also See for HWM80-27S:

Advertisement

Quick Links

Twin-tub Washing Machine
This manual is for
HWM80-27S
Please read this manual
carefully before using.
Retain it for future reference.
User's manual

Advertisement

Table of Contents
loading

Summary of Contents for Haier HWM80-27S

  • Page 1 Twin-tub Washing Machine This manual is for HWM80-27S Please read this manual carefully before using. Retain it for future reference. User's manual...
  • Page 2: Table Of Contents

    Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list *Specification...
  • Page 3: Names Of The Parts

    Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Water level adjusting lever Lint filter Installed by user) Valve cover Pulsator Wash tub Drain hose Wash tub cover Base frame Meaning and description of the symbols Warning sign Forbidding sign...
  • Page 4: Safety Precautions

    Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department.
  • Page 5 Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine.
  • Page 6: Installation And Adjustment

    It is very important to your security and correct operating the machine. Voltage change This washer is assembled for 220V, but can be changed from 220V to 127V. Check your electrical source and follow the diagram below to convert voltage.
  • Page 8: Usage Of The Drain Hose

    Installation and adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause incomplete drainage. 2.Do not tramp or press the drain hose.
  • Page 9: How To Change The Direction Of The Drain Hoses

    How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks.
  • Page 10: Preparation Before Washing

    Preparation before washing Pay attention to followings before washing the laundries Check if Clear the the laundries pocket. Take has special out the coins, requirement sand, hairpins on washing etc. a. Check if the laundries are applicable for washing with machine. b.
  • Page 11: The Musts In Washing

    The musts in washing Usage of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laun- dries with color or pattern as they are prone to lose color.
  • Page 12: Washing Sequence

    Washing sequence Wash selector (standard current, gentle current) Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). STANDARD GENTLE WASH SELECTOR WASH TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH"...
  • Page 13 Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Proper (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes.
  • Page 14: Rinse With Water-Filing

    Rinsing Rinse with water-filing 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing.
  • Page 15 Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries.
  • Page 16: Disposal After Washing

    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing.
  • Page 17: Cleaning The Overflow Filter

    Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4.
  • Page 18: Trouble-Shooting Answer To Question

    Trouble-shooting Answer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "GENTLE" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. When the water is frozen Pour hot water below 50 to soak it completely.
  • Page 19 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
  • Page 20: Packing List

    Packing list Name User's manual Water inlet hose Lint filter Gland Water tub Add highness bottom foot Twin-tub washing machine Specification Water level/Water quantity (about) Rated washing capacity(kg) Rated spinning capacity(kg) Injection pressure(MPa) Quantity Maximum/55L Medium/46L Minimum/36L 0.02~0.2 MADE IN CHINA One piece One piece One piece...

Table of Contents