HWM80-35 Single-tub Washing Machine with Pump Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety. The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual.
Names of the parts Control panel Water inlet Water selector Timer knob Filter cap Quick water inlet Lint filter(Installed by user) Valve cover Handle Panel support Pulsator Cabinet Base Accessories Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
Safety precautions Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. Earth If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department.
Page 4
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drainage shall be smooth with the drain hose. 1.Put the drain hose up to suitable position 2.Do not step on or press the drain hose Install the lint filter...
Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2. Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. Install the water inlet hose ;...
1 Preparation before washing Pay attention to followings before washing the laundries Check C l e a r the laundries pocket. Take has special out the coins, requirement sand, hairpins on washing etc. a. Check if the laundries are applicable for washing with machine. b.
Using process Using process 2 Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
3 Put in the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly.
6 Close the top lid 7 Finish washing The pulsator stops rotating SELECTOR" at "DRAIN". 8 Disposal after washing After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
Trouble-shooting The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Phenomena The washing machine does not act There's abnormal sound inside the machine. The drainage does not work. Packing list User's manual Water inlet hose Water-filling jointer Lint filter Washing machine...
Rated voltage F requency Water level Water quantity about Rated input power for washing W Rated input power for draining W Dimensions(mm) Weight kg Injection pressure Single-tub washing machine with pump HWM80-35 220V~ 50Hz Maximum /83L Medium/68L Minimum/49L L520 W490 H916 0.02MPa~0.2MPa...