Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Haier HWM80-0528
Summary of Contents for Haier HWM80-0528
- Page 1 Fully Automatic Washing Machine User's manual This manual is for HWM80-0528 Please read this manual carefully before using. Retain it for future reference.
-
Page 2: Table Of Contents
CONTENTS CONTENTS the 2nd cover Names of the parts Safety precautions Installation and adjustment Install the water inlet hose Preparation before washing Put in the laundries Usage of the detergent Close the top lid Use the operation buttons Finish washing Disposal after washing Trouble-shooting Answer to question... -
Page 3: Names Of The Parts
Names of the parts Cold water valve Water absorption cushion Hot water valve Top lid component Power cord Detergent box Handle Control panel Lint filter (installed by user) Balance ring Hanging hole Drain hose for the drain Inner tub hose Screw cover Å... -
Page 4: Safety Precautions
Safety precautions The washing machine must be positioned Please plug the power plug on special so that the plug is accessible. Be sure to pull receptacle. Be sure to use three-pins the plug off and close the water faucet in power receptacle. - Page 5 Safety precautions Do not put hand into the rotating tub. Do not decompose, repair or alter It is dangerous even if the rotation the machine by yourself. speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on it.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the inner tub. -
Page 7: Usage Of The Drain Hose
How to change the direction of the drain hose 1.Dismantle the back cover of the washing 3.Dismantle the protecting cover of the machine. drain outlet at the other side (method 2.Put down the drain hose. Take off the the same as the bushing). Install the drain hose frame. -
Page 8: Install The Water Inlet Hose
Install the water inlet hose Confirm the water tap Water tap,not suitable Water tap,suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. -
Page 9: Connection Between The Water Inlet Hose And The Washing Machine
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. -
Page 10: Preparation Before Washing
1.Preparation before washing Preparation before washing 1.Connect the water inlet hose 2.Confirm that the washing machine is earthed reliably.Then insert the power plug into the receptacle.Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang up the drain hose. 4.Slanting or uneven ground may result in unstable working... -
Page 11: Put In The Laundries
2.Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. -
Page 12: Use The Operation Buttons
5 Use the operation buttons a Description of operation button Process,remain time digitron "POWER ON/OFF" button Push the " POWER ON/OFF" button to It displays "--" during detecting. switch on the power. It displays total remained time Under power-on mode, push it to switch (min). - Page 13 b Steps of using the operation buttons and description of the steps PROGRAM TEMP SELECT FUZZY POWER SOAK NORMAL WARM ON/OFF TIME WASH HEAVY REMAINING START RINSE QUICK WASH COLD PAUSE SPIN SPIN ONLY WATER PROGRAM LEVEL 1.Push "POWER ON/OFF"button to switch on the power POWER ON/OFF 2.Push "...
-
Page 14: Finish Washing
Program select Wash The running process(the digitron The display Program Application displays the running process) temperature of digitron Washing for normal Warm NORMAL SOAK ( RINSE ( laundries Washing for coverlet RINSE ( HEAVY bigger laundries Washing the woollen QUICK WASH RINSE ( Cold silk textiles... -
Page 15: Disposal After Washing
7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during Clean the detergent box and set it on washing. -
Page 16: Trouble-Shooting Answer To Question
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. -
Page 17: Packing List
Packing list Quantity Name Components of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose to the water faucet The end connecting to the water inlet hose jointer Lint filter Tapping screws Eight Bottom plate Fully automatic washing...