D-Fi™ 2.4 Ghz (Ir/Standalone Mode Manual Sync) - Chauvet Freedom Par User Manual

D-Fi™ 2.4 Ghz
(IR/Standalone
Mode Manual
Sync)
Page 22 of 76
The Freedom™ series can be configured to control two or more products with no
external controllers or with the IRC from CHAUVET ® (sold separately). To manually set
up the D-Fi™ syncing function for IR/standalone functionality, do the following:
For the transmitting product:
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select SYS.
3. Press <ENTER>.
4. Press <UP> or <DOWN> until S-tr appears on the display.
5. Press <ENTER>.
6. Press <UP> or <DOWN> until t.CH appears on the display.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to select the transmitting signal (t001–t016).
For the receiving product(s):
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select SLAv.
3. Press <ENTER>.
4. Press <UP> or <DOWN> until r-st appears on the display.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the receiving signal (r001–r016). The channel
number should match the transmitting signal you chose in the prior steps.
Once the steps above are done, you can then back out and configure the transmitting
product to operate it in either Automatic Mode or with an IRC (sold separately).
To configure your product to work in Automatic Mode, refer to the
section of the Operation section of this manual.
To configure your product to work with the CHAUVET ® IRC, refer to the
Remote Control) section of the Operation section of this manual.
If you are experiencing antenna issues or need to improve signal quality, extend the
antenna outward away from the product and keep the line of sight between products
unobstructed.
Ensure that all linked products are configured to the same DMX personality (either
3-channel or 4-channel).
To sync multiple transmitters in one room, manually set each receiver and the
designated transmitter to a specific frequency and then perform the syncing steps.
Automatic Mode
IRC (Infrared
Freedom™ series User Manual (Rev. 6 ML)