Caring For Your Machine; Removing And Replacing Bobbin Case - Singer 4671 User Manual

SECTION 6
CARING FOR YOUR MACHINE
REMOVING AND REPLACING BOBBIN CASE
CAUTION: Before cleaning or adjusting
the machine, remove plug from the
socket outlet,
* Raise presser foot and needle.
* Open slide plate and remove bobbin.
.
To remove the bobbin case, the needle
plate must be removed first.
Lift needle plate (1) from right corner and
slide out from under toot.
TO REMOVE BOBBIN CASE
. With a small screwdriver turn lever (2)
4<
~~~~~back
as far as it will go
K
1vV *
*
Lift
out bobbin case.
2 _
TO REPLACE THE BOBBIN CASE
4 'K
*
~~~Guide
forked end (3) of bobbin case
{Ci/)
5
3 under feed (4).
*4
/
]
tt < 1 )
*
Draw rim of bobbin case under position
plate (5).
|<
-<
r1
f
.
Turn lever (2) toward you, locking bobbin
case in place
NOTE: After locking case in place. be sure
it is not tight, but can move slightly.
\ To replace needle plate, slide it under
/
7.}
X h\> <w2
pin (6) and push it to the left,
6 -.
>
S . Press needle plate down in place
< _ _ . insert bobbin and close slide plate,