Singer 4671 User Manual page 20

KEEPING SEAMS STRAIGHT
To keep seams straight. use one of the
guidelines on the needle plate The most
commonly used line (1) is extended onto
!
rrs
T
/'
K
the slide plate The crosslines (2) serve as
\ \
>
guides when stitching square corners
I~~
~~~
''>
2
. -j
j
2
TURNING SQUARE CORNERS
KAAF
l-
/ rTo turn a square corner, use crosslines on
slide plate
\ Line up fabric with extended guidelines
on needle plate and slitch seam. slowing
speed as you approach corner
.When bottom of fabric: reaches corner
ing crosslines (2) on slide plate, stop
stitching
t,
-1 . Be sure needle is down in fabric
1Raise presser foot slightly, Turn fabric,
K
\ /
bringing bottom edge in line with guide-
line (1).
* Continue stitcling seam
USING THE SEAM GUIDE (N)
(Not included with 10 pattern sewing
/ UiiIJ
machine. See page. 35)
For extra help in keeping seams straight,
particularly for very narrow or very wide
seams, use the seam guide which comes
with your machine.
To attach the seam guide, place screw of
seam guide into the hole in the bed of the
. machine, on the right side of slide plate (1).
r a
Line up the straight edge of the guide with
1 the needle plate guideline for desired
seam width and lighlen screw,
18