Operation; Control Panel Description; Control Options Legend 412; Control Options Legend 412 Vw - Chauvet Legend 412 User Manual

4. Operation

Control Panel
Description
Control Options
Legend 412
Control Options
Legend 412 VW

Programming

DMX Personality

Legend™ 412 Series User Manual Rev. 04
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected
<ENTER>
value in to the current function
Navigates upward through the menu list and increases the numeric
<UP>
value when in a function
Navigates downward through the menu list and decreases the numeric
<DOWN>
value when in a function
You can set the Legend™ 412 start address in the 001~512 DMX range. This enables
control of up to 18 units in the 28 channel ADVANCED personality.
You can set the Legend™ 412 VW start address in the 001~512 DMX range. This enables
control of up to 25 units in the 20 channel ADVANCED personality.
Refer to the Menu Map
and a variable number of programming levels for each option.
 To go to an option in the Menu Level, press <MENU> repeatedly until the option shows
on the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
 To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will see
the selected value.
 To exit to the previous menu level, press <MENU>.
This setting allows you to choose a particular DMX personality.
1. Go to Chnd and press <ENTER>.
2. Select the desired personality based on the product.
 Legend™ 412:
Select 12Ch (Basic) or 28Ch (Advanced)
 Legend™ 412 VW:
Select 10Ch (Basic) or 20Ch (Advanced)
 See the DMX Values
each personality.
 Make sure that the s tarting addresses on th e various products do not overlap
due to the new personality setting. See the DMX Values section.
to understand the menu options. The menu map has a Menu Level
section for the highest starting address you can select fo r
Function
Operation
-11-