Table of Contents
Advertisement
6
PC set-up
6.1 Installing USB cable
1
Connect the USB cable to the USB port on the back of
the base.
2
Connect the other end of the USB cable to the USB port
of the PC.
6.2 Making a test Call Using Microsoft Of-
fice Communicator
1 ensure Microsoft Office Communicator is running on
your PC.
2 With your headset on, press the base PC talk button.
3 Set the headset and microphone volume to a
comfortable level using the Microsoft Office
Communicator "Set Up Audio and Video" page.*
4 Place a test call using Microsoft Office Communicator.
5 Adjust the receive and listen volume to comfortable
levels using the volume control in the "Conversation
Window".*
6 You can also fine tune the listening volume on the
headset by pressing the [+] to increase the volume and
the [-] to decrease the volume.
Plantronics Savi User Guide
7 to end the test call, press the call control button on the
headset.
For your safety, do not use headset at high volumes
for extended periods of time. Doing so can cause
hearing loss. Always listen at moderate levels. For more
information on headsets and hearing visit: plantronics.
com/healthandsafety.
* Consult Microsoft Office Communicator Help for more
information
6.3 Installing Plantronics software for incre-
mental value (optional)
1
In the animated set-up guide located on the CD, select
Step 6.2 Installing Plantronics software.
2
Click on the graphic of the CD labelled "Plantronics
Software".
3
Follow installation instructions shown on screen
12
Advertisement
Table of Contents
