Pc Set Up; Installing Usb Cable; Installing Plantronics Software; Making A Test Call With Pc - Plantronics Savi Office WO300 User Manual

6

PC Set Up

6.1 Installing USB Cable

1 Connect the USB cable to the USB port on the back of
the base.
2 Connect the other end of the USB cable to the USB port
of the PC.

6.2 Installing Plantronics Software

1
In the animated setup guide located on the CD, select
Step 6.2 Installing Plantronics Software.
2 Click on the graphic of the CD labeled "Plantronics
Software".
3
Follow installation instructions shown on screen.
Plantronics Savi User Guide

6.3 Making a test Call with PC

1 While wearing your headset, press the PC talk button on
the base.
2 Dial the number using your softphone application.
3 Adjust listening and speaking volume over the PC as
follows:
®
For Windows XP Systems-
Go to the "Voice" tab of the "Sounds and Audio Devices"
option in your PC control Panel.
• "Voice playback" volume is your receive volume
• "Voice recording" volume is your transmit volume
For Windows Vista ® Systems-
Go to the "Playback" tab for listening volume or
"Recording" tab for speaking volume of the "Sound" option
in your PC control panel.
• "Speakers Level" volume is your receive volume
• "Microphone Level" volume is your transmit volume
4
You can fine tune the listening volume on the headset
by pressing the [+] to increase the volume and the [-] to
decrease the volume.
5 to end the test call, press the call control button on
the headset.
12