Set Up; Connecting Usb Adaptor To Pc; Connecting Power Supply To Charger Base - Plantronics Savi Go WO101/B User Manual

2

Set Up

2.1 Connecting USB Adapter to PC
1 Insert the USB adapter into USB Port on PC. The indicator
light on the base will be solid red to indicate the USB adapter
is powered on.
NOTE If the USB port is hard to access, use the provided USB
extension cable.
ImPOrTANT NOTE
For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
Microsoft Windows XP-Service Pack 3 (SP3) or later
®
Microsoft Windows Vista -Service Pack 1 (SP1) or later
®
Plantronics Savi Go WH100/B Optimized for Microsoft Office Communicator 2007 User Guide
2.2 Connecting Power Supply to Charger
Base
1
Connect the base power supply into the power jack on
the charger base.
2 Connect the power supply to the outlet. The power
indicator light will be solid green.
6