Replacing The Toner - Canon imageRUNNER 2320 User Manual

Hide thumbs Also See for imageRUNNER 2320:
Table of Contents

Advertisement

Replacing the Toner

When there is only a small amount of toner remaining in the machine, the following
message blinks on the LCD display. You may continue printing, however, it is
highly recommended that you prepare a new toner cartridge before the toner has
completely run out.
Toner low
3
Prepare new toner
Density: Auto
ImgQual.: Text
2-Sided: Off
When prints can no longer be made as toner runs out completely, the following
display appears on the LCD display. Follow the procedure described below to help
you replace the toner cartridge.
NOTE
For detailed information on the displays showing the instructions on replacing the toner
or staples, clearing the paper or staple jams, see Chapter 7, "Troubleshooting," in the
Reference Guide.
Out of toner
When
press [ ] to
display steps
WARNING
Do not burn or throw used toner cartridges into open flames, as this may cause
the toner remaining inside the cartridges to ignite, resulting in burns or a fire.
Do not store toner cartridges or paper in places exposed to open flames, as this
may cause the toner or paper to ignite, resulting in burns or a fire.
When discarding used toner cartridges, put the cartridges in a bag to prevent
the toner remaining inside the cartridges from scattering, and dispose of them
in a location away from open flames.
3-10

Replacing the Toner

is shown

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 2318Ir2318

Table of Contents