Advertisement
Installation
Instructions
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
• Insert the elbow through the rear opening and connect
it to the dryer internal duct.
• Apply duct tape on the joint between the dryer internal
duct and elbow, as shown on page 7.
CAUTION:
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET
PLATE
(KITWEII454)
Connect standard metal elbows and ducts to complete
the exhaust system. Cover back opening with a plate (Kit
WEllV1454)available from your local service provider.
Place dryer in final location.
WARNING-NEVER
LEAVE THE BACK
OPENING WITHOUT THE PLATE.
[]
CHANGING
DIRECTION OF DOOR
OPENING
REMOVE4
HINGESCREWS.
REMOVE4 HOLEPLUGSAND
PLACETHEMIN THE HOLES
ONTHE OPPOSITE SIDE.
ROTATE DOOR 1800
AND REINSTALL.
8
Advertisement
