Advertisement
Installation
Instructions
IYI RECONNECTING
GAS
Listed connector
ANSt
Z21.24 / CSA 6.10
1/8" NPT PIPE
NEW METAL
PLUG FOR
GAS
FLEXIBLE GAS
INLET PRESSURE
LINE CONNECTOR
ADAPTER
ELBOW
3/8" NPT
SHUT-OFF
PIPE SIZE
ITEMSNOT SUPPLIED
_AT
LEAST1/2"
Note: The connector and fittings are designed for use
only on the original installation and are not to be reused
for another appliance or at another location. Keep flare
end of adaptor free of grease, oil and thread sealant.
CAUTION:
Use adapters as shown. Connector
nuts must not be connected directly to pipe threads.
APPLYPIPECOMPOUND
TOTHE ADAPTER AND
DRYER GASINLET.
GAS LINE USING
TWO _
I
TIGHTENTHE FLEXIBLE"_
ADJUSTABLEWRENCHE& _
APPLYPIPECOMPOUND
TO ALL MALETHREADS.
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!
I%-1 LEAK TEST
WARNING:
NEVER USE A NOPEN
FLAME TO TEST FOR GAS LEAKS.
OPEN
GASVALVE.
Check all connections
for teoks with soopg solution or equivalent.
Apptg soap solution. Leek test solution
must not contain
ammo-
niawhich could cause damage to the brass fittings. If leaksGre
found, close v(]lve, retighten the joint, and repeat the soap test.
3
Advertisement
