Tools You Will Need; Mounting Space - GE JVM1600 Series Installation Instructions Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2 Phillipsscrewdriver
Pencil
Tin snips(for cutting
damper,if required)
Scissors
(to cut template,if necessary)
Gloves
Safetygoggles
Saw(saber,hole or keyhole)
Ruleror tape measure
aightedge
Electricdrill with s/116", 7/11g', syu,-
1½- and%" drill bits
Studfinder er Hammer(optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Ductandmaskingtape
MOUNTING SPACE
II] t[] III
NOTE: M aximumcabinetdepth is 13".
ill
66" or more
from the floor
to the top of
the oven
\
Bottomedgeof
cabinetneedsto
be 30" or more
from the cooking
surface
Backsplash
NOTES:
" The space between the cabinets must be 30"
wide and fl'ee of obst_ uctions.
• If the space between the cabinets is greater
than 30", a Filler Panel Kit may be used to fill
in the gap between the oven and the cabinets.
Yore" Owner's Manual contains the kit nmnber
for vour model.
• This oven is tot installation over ranges up to
36" wide.
• If win are going to vent w)m" oven to the outside,
see Hood Exhaust Section for exhaust duct
preparation.
• When installing the oven beneath smooth, flat
cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
7