GE JVM1600 Series Installation Instructions Manual page 18

Installation Instructions
MOUNT THE OVEN
FOIl EASIER INSTAI,IATION AND PERSONAI,
SAFETY, X.VERECOMMEND THAT TWO PEOPLE
INSTALL THIS OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If vour cabinet is metal, use the nylon
gronmlet around tile power cord hole to prevent
cutting ot tile cord.
NOTE: We recoumlend using filler blocks if tile
cabinet front hangs below tile cabinet bott(nn shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from over
tightening screws.
NOTE: When mounting
tile oven, thread power
cord through hole ill
bottonl of top cabinet.
Kee I) it tight throughout
Steps 1-3. Do not pinch
cord or lifi oven bv
Imllin(*', cord.
[]I,ifl ()veil, it
tilt
fin'ward and hook
slots at back l)()ttom
edge onto two lower
tabs of mounting plate.
\
/
_ Rotate
front (If oven lip
against cabinet 1)()ttom.
CabinetFront
CabinetBottomShelf
FillerBlock
T quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
OvenTop
[]Attach tile oven to tile top cabinet by inserting
3 sell=aligning screws through outer top cabinet
holes. Turn two fllll ttu'ns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
[] Tighten tile three screws to tile top of tile oven
c(mlpletely. (X.Vhile tightening screws, hold the
oxen in place against tile wall and tile top
cabinet.)
_ Install grease filters. See tile Owner's Manual
packed with tile oxen.
18