Maintenance And Service - Star Trac Max Rack IP-L8505 Owner's Manual And Installation Instructions

MAINTENANCE AND SERVICE

The Max Rack requires very little upkeep to keep your Max Rack performing at its best, the
following guidelines are suggested.
GENERAL CLEANING
Wipe the Max Rack with a light all-purpose cleaner, such as diluted Simple Green at a
30:1 solution.
Dry the Max Rack with a soft cloth to prevent rust.
To prevent rust build up it is advised to wipe the Max Rack with a soft cloth and some
LPS-1 rust preventative.
Do not clean the guide rods or bearings as this will cause failure of the bearings.
LUBRICATION OF GUIDE RODES
Place light oil (i.e. Three-In-One) onto a clean rag and wipe it along the vertical and
horizontal steel rods monthly.
The bearings inside the barbell housings are sealed and require no maintenance.
Do not use grease or heavy lubricating oil.
Page 8