Attach Anti-Tip Bracket To Floor - Bosch HES7022U-01 Installation Instructions Manual

6. Insert s tripped endofwhitewireintothecenterlugontopoftheground strap.
Secure theclamping screw.
lug
wire
clamping screw
Figure 17: Attaching Wire to Lug
7. Insert stripped end of red wire into the left lug. Secure clamping screw.
8. Insert stripped end of black wire into the right lug. Secure clamping screw.
9. Tighten each clamping screw with the appropriate torque (See table below).
Table 3: Appropriate Torque Levels for Aluminum or Copper Wire
6
10. Properly secure flexible conduit at knockout panel on range and at supply
side junction box. The wiring is now comple!e: :....................................................................
green g'ound screw
Figure 18: Completed Three Wire Flexible Conduit Connectiog
6) Attach anti-tip bracket to floor
Note: DO NOT plug in range at this time.
WARNING
RANGE TIPPING HAZARD
All ranges can tip and injury could result. To prevent accidental tipping of the
range, attach it to the wall, floor or cabinet by installing the Anti-Tip Device sup-
plied.
English 12