Attach Anti-Tip Bracket To Floor - Bosch Electric Free-Standing Range Installation Instructions Manual

6) Attach anti-tip bracket to floor

English 12
6. Insert stripped end of white wire into the center lug on top of the ground strap.
Secure the clamping screw.
.
lug
wire
7. Insert stripped end of red wire into the left lug. Secure clamping screw.
8. Insert stripped end of black wire into the right lug. Secure clamping screw.
9. Tighten each clamping screw with the appropriate torque (See table below).
Table 3: Appropriate Torque Levels for Aluminum or Copper Wire
Gauge
6
8
10. Properly secure flexible conduit at knockout panel on range and at supply
side junction box. The wiring is now complete. .
Figure 18:
Note: DO NOT plug in range at this time.
WARNING
RANGE TIPPING HAZARD
All ranges can tip and injury could result. To prevent accidental tipping of the
range, attach it to the wall, floor or cabinet by installing the Anti-Tip Device sup-
plied.
clamping screw
Figure 17:
Torque (in./lbs.)
35
25
green ground sc rew
Completed Three Wire Flexible Conduit Connectiog
Attaching Wire to Lug
Torque (Nm)
3.95
2.82