Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket,
if the range is moved.
Failure to follow
these instructions can result
in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
•
Tape measure
•
3/le" carbide tip masonry bit
•
#2 Phillips screwdriver
•
Marker or pencil
•
1/8"x 41¼ '' flat-blade
•
Pipe-joint compound
screwdriver
resistant to LP gas
•
Level
•
Noncorrosive leak-detection
•
Drill
solution
•
Wrench or pliers
•
Tubing cutter
•
Pipe wrench
For LP/Natural
Gas
•
Adjustable wrench or
Conversions
8/8"wrench
•
Adjustable wrench
•
3/8"drive ratchet
•
1/2"deep-well socket
•
1/8"drill bit
•
7 mm nut driver
•
18/le"combination
wrench
•
Masking tape
•
1/4",3/8", 8/W' nut drivers
Parts supplied
Check that all parts are included.
•
Anti-tip bracket kit
•
Burner bases and burner caps
•
Griddle drip tray (on griddle models)
•
LP orifice package (W10393336)
•
Conversion label (8114P522-60)
NOTE: The cooktop is manufactured for use with Natural gas. To
convert to LP gas, see the "Gas Conversions"
section.
Parts needed
All models must be installed with a backguard
if installing at zero
clearance to a combustible
backwall. See "Cabinet Dimensions"
in the "Location Requirements"
section for installation
requirements.
•
30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
•
36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
•
48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
30"(76.2 cm) Ranges
Order Part Number W10285447
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
36" (91.4 cm) Ranges
Order Part Number W10285448
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
48" (121.9 cm) Ranges
Order Part Number W10285449
To order, see the "Assistance
or Service" section of the Use
and Care Guide.
A
\'B
A. Anti-tip bracket
B. #8-18 x 1" Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to subfloor.
Thickness of flooring may require longer screws to anchor
bracket to subfloor. Longer screws are available from your local
hardware store. See "Install Anti-Tip Bracket" section.
•
Gas pressure regulator
Check local codes and consult gas supplier. Check existing gas
supply and electrical supply. See "Electrical Requirements"
and
"Gas Supply Requirements"
sections.
It is recommended
that all electrical connections
be made by a
licensed, qualified electrical installer.
High Altitude Conversion
To convert the range for elevations above 6,560 ft (1999.5 m),
order a High Altitude Conversion
Kit.
•
Part Number W10394294 - LP high altitude
•
Part Number W10394293 - Natural gas high altitude
To order, see the "Assistance
or Service" section of the Use and
Care Guide.
•
Burner grates