Jenn-Air PRO-STYLE JGRP430WP01 Installation Instructions Manual page 24

13. Replace oven bake burner electrode inside bracket.
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
14. Reinstall the oven bake burner and oven bake burner screws.
See Step 6 for illustration.
15. Replace oven baffle and oven baffle nuts.
Replace Oven Bake Burner Cover
1. Align notches on the oven bake burner cover with shoulder
screws in the bottom of the oven.
2.
Lower cover and slide to left or right to slide shoulder screws
into the narrow ends of the notches and lock into place.
o
A/f
A. Bakeburner cover
To Convert Oven Broil Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the Right Oven Cavity on 48"
[121.9 cm] models)
1. Remove broil burner screw and set aside.
2.
C _¸
A. Broil burner screw
B. Broil burner
C. Broil burner orifice hole
Pull the broil burner toward you until it slides out of the hole in
the oven back, and pull the electrode out of the bracket. The
broil burner will hang down in the back of the oven while you
change the orifice.
A. Cover notches (4)
B. Shoulder screws (4)
\
©
0
A. Grasp electrode here.
B. Bracket
24