Jenn-Air PRO-STYLE JGRP430WP01 Installation Instructions Manual page 26

7. Pull electrode out of bracket. 11. Push down on the clip on the electrode bracket.
A
B
A
8.
A. Grasp electrode here.
B. Bracket
Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening and press down onto
the gas orifice spud and remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice spud
aside.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
12. Replace oven bake burner electrode inside bracket.
B
A
A. Gas orifice spud
9. Gas orifice studs are stamped with a letter and a number.
Install the Number 154 oven bake burner orifice spud.
10. Place LP gas orifice in plastic parts bag for future use and
keep with package containing literature.
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
13. Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
26