Table of Contents
Advertisement
USB Menu
These settings control communication between the product and
the computer when using a USB interface.
Item
*1
USB I/F
USB Speed
USB ExtI/FConfg
Get IPAddress
IP (IP address)
SM (Subnet mask)
GW (Gateway address)
*2
Netware
AppleTalk
MS Network
Rendezvous
USB EXT I/F Init
*1
After this item is changed, the setting value takes effect after a warm boot
or after the power is turned on again. While it is reflected in the Status Sheet,
the actual change takes effect after a warm boot or after the power is
turned on again.
*2
Displayed only when a USB external device is connected and the USB Ext
I/F Confg is set to Yes. The contents of the settings depend on the USB external
device settings.
*3
Displayed only when the Get IPAddress is set to Auto. This setting cannot be
changed.
*4
When the Get IPAddress is changed from Panel or PING to Auto, the panel
setting values are saved. When Auto is changed to Panel or PING, the saved
setting values are displayed. 192.168.192.168 if the settings are not made
from the panel.
*1
*1
*2
*2*3*4
*2
*2
*2
*2
*2
*2
Settings
Yes, No
HS, FS
Yes, No
Panel, Auto, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
On, Off
-
Using the Control Panel
9
9
9
9
9
9
9
9
9
9
9
9
299
Advertisement
Table of Contents
