Table of Contents
Advertisement
For Printer Settings:
In general, Printer Settings can be made from the printer driver,
and do not need to be made using the Setup menu. In fact, printer
driver settings override settings made using the Setup menu, so
use the Setup menu only to make settings you cannot make in
your software or printer driver.
How to access the Setup menu settings
For a complete description of the items and settings available in
the Setup menu, see "Setting menus" on page 291.
1. Make sure the product is turned on, and then press the
Setup button.
The Setup light is lit and the LCD panel shows Setup Mode
for a few seconds, and then changes to the Setup menu screen.
Note:
An arrow mark in the LCD panel indicates the currently available
button (u Up, d Down, l Left, or r Right) on the control panel
for the operation.
2. Use the u Up and d Down buttons to select your desired
Setup menu, and then press the r Right button to view the
items in the menu.
Using the Control Panel
9
9
9
9
9
9
9
9
9
9
9
9
289
Advertisement
Table of Contents
